37 in 1 sensors-Compatible for Arduino
This is an era of artificial intelligence. Artificial intelligence is everywhere and has been integrated into our lives, especially for all kinds of robots. To understand the robot, we should understand the control system of the robot. The micro-controller we learn...
Arduino Antenna GSM
Designed for providing effective GSM / GPRS /3G & 2.4GHz performance in indoor applications; this antenna is popular for in vehicle communications as both a versatile antenna for hands free car kits or in after market telemetry applications. ...
Arduino Pro Gateway for LoRa 868MHz EU
Monitor your factory, vehicle fleet, or agricultural site with the LoRa® PRO Gateway. Arduino Pro is a one-stop-shop for all of your LoRa® and LoRaWAN™ needs. Whether inside a large industrial space, at an outdoor agricultural site, or monitoring a...
The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into an MKR based one without too much effort! You can so upgrade your project with a powerful board with an integrated LiPo battery charger.
Arduino MKR Connector Carrier
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem. The MKR CONNECTOR CARRIER shield is an essential tool for rapidly...
Arduino MKR ETH Shield
The MKR ETH shield allows having a wired Ethernet connection between your MKR board and your network or the Internet. This is particularly useful for devices located where either electromagnetic noise is a problem or there are special safety requirements....
Arduino MKR CAN-BUS Shield
Need to connect a device to a CAN (Controller Area Network) for communication within an automobile and with other CAN devices? The Arduino MKR CAN shield will provide automotive CAN connectivity. The MKR CAN shield can simplify the connection of...
Arduino MKR 485 Shield
The MKR 485 shield is the ultimate expansion that allows MKR boards to connect to almost any legacy industrial system, such as industrial PLCs, controllers, drives, and HMIs. Old industrial systems (e.g., machinery, heating systems, and conveyors) can to turned...
Arduino MKR Motor Carrier
The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers.
Arduino 4 relays shield
The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2...
Arduino 9 Axes Motion Shield
The Arduino 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH which integrates a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second and a triaxial geomagnetic...
Arduino Motor Shield Rev3
The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board,...
Arduino ETHERNET Shield 2
The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through...
MKR SD SHIELD
The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as well as store data coming from the web or...
Arduino MKR GPS Shield
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. This module is designed to operate with different positioning services concurrently. It receives and processes the signals from GPS, GLONASS, and Galileo. It interfaces...
Arduino MKR Therm Shield
The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one-wire sensor. The Thermocouple is a kind of temperature sensor that offers high accuracy and a...
Arduino MKR Environmental Shield
The MKR ENV Shield allows an MKR board to acquire environmental data collected by an array of sensors. To help you build projects and store the data collected locally, this shield has a slot for a microSD card. There is...
Arduino MKR RGB
84 LEDs at your service! A ready to use the library with examples and methods are available for users to easily write static and scrollable text. You can use this shield to show values from your board and is controllable...
Arduino MKR MEM Shield(ex OTA Shield)
The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. It also includes a slot for adding a microSD card to store several gigabytes of storage. This can allow...
MKR RELAY SHIELD
The MKR Relay Proto Shield allows you to easily command relays with your MKR board. The shield provides two onboard relays and a small prototyping area if you need to add some other components to your project.
MKR PROTOSHIELD L
The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounting holes. This shield features a larger prototyping area with more than 300 solder...
The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers and offers a duplicate breakout for each pin on the board along with many solderable...
ATMega328 - microcontroller - bootloader UNO
Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having to use an actual Arduino board.